Paper Input; List Print - Kyocera FS-C1020MFP User Manual

Contents Previous
Top Page > Configuring the Machine Using the Control Panel
PDL Setting Parameters
This section describes the PDL setting parameters.

Paper Input

List Print

Prints lists showing configurations on the machine.
System
Next
>
Tray Priority
●
Specifies the tray that the machine checks first for paper that matches the print.
[Tray2] appears only when it is installed.
Default: [Tray1]
Tray1
Tray2
Configuration Page
●
Prints general information and the current configurations of the machine.
Menu List
●
Prints the machine's function menus.
Test Page
●
Prints a test page to check the current color settings.
PCL Font List
●
Prints installed PCL font list.
PS Font List
●
Prints installed PostScript font list.
Copies
●
Sets the machine to print the specified number of sets.
This setting is disabled if the number of pages to print is specified by the printer driver.
Default: 1
1 to 999, in increments of 1
Sub Paper Size
●
Sets the machine to print onto paper of another size if the specified paper is not loaded in any
tray. Alternative sizes are preset to A4 and Letter.
Default: [Off]
On
Off
Default Paper Size
●
Specifies the paper size to be used when the paper size is not specified in the print job.
Default:
A4, B5 JIS, A5, B6-S, A6, Legal, Letter, Half Letter-S, Executive, 8 × 13, 8.5 × 13, Folio,
16K, Com 10, Monarch, C5 Env, C6 Env, DL Env
PDL Settings > PDL Setting Parameters
1
Letter (8 / " × 11"),
2
Settings
A4