Control Panel - Kyocera FS-C1020MFP User Manual

Contents Previous
Top Page > Guide to the Machine

Control Panel

This section describes the names and usage of the parts of the control panel.
The actual control panel may look different from the illustration below, depending on the country of use.
●
1. One Touch Buttons
Press to select a scan or fax destination using entries registered as Quick Dial in the Address Book.
2. [On Hook Dial] key
Press to use on-hook dialing to check the destination's status when sending a fax.
3. [Address book] key
Press to specify destinations from the entries in the Address Book when sending a fax or scanned file.
4. [User Tools] key
Press to display the menu for configuring the machine's system settings.
5. [Image Quality] key
Press to select scan quality for the current job.
6. Screen
Displays current status and messages.
7. Menu keys
Press any of these four keys to display the menu for configuring the settings of the machine's current operation
mode (copier, scanner, or fax).
Next
> Guide to Components > Control Panel
Copier mode: select Text, Photo, or Mixed.
Scanner mode: select the resolution.
Fax mode: select Standard, Fine, or Photo.
[ ] key
Press to exit to the previous level of the menu tree.
[ ][ ] keys
Press to scroll through the current level of the menu tree. When entering characters, press the [ ] or [
] key to move the cursor left or right, respectively.
[OK] key
Settings