Connecting With Network Cable - Kyocera FS-C1020MFP User Manual

Contents Previous
Top Page > Getting Started >

Connecting with Network Cable

●
Follow the procedure below to connect the machine to a computer through a network. Prepare the hub
and other network devices before connecting the 10BASE-T or 100BASE-TX cable to the machine's
Ethernet port.
Use shielded Ethernet cable. Unshielded cables create electromagnetic interference that could cause malfunctions.
●
The Ethernet cable is not supplied with this machine. Select your cable according to the network environment.
●
Remove the cable cover.
Connect the Ethernet cable to the Ethernet port.
Connect the other end of the cable to the network (e.g., a network hub).
Attach the cable cover.
Next
Connecting the Machine > Connecting with Network Cable
Do not connect the Ethernet port of the machine to a network that may supply excess voltage, such as a
telephone line. Doing so may result in fire or electric shock.
Settings