Clearing A Staple Jam - Kyocera KM-2050 Basic Operation Manual

Clearing a Staple Jam

BASIC OPERATION GUIDE
5 Insert the Staple Holder back into
the stapler unit. The holder should
click into place when inserted
correctly.
6
Close the Stapler Front Cover.
1
Remove the Staple Holder, refer
to Adding Staples, on page 4-10.
Using Knob A on the Staple
Holder face plate, raise the plate.
2 Remove the jammed staple from
the end where the staples are fed.
3
Lower the Staple Holder face
plate back to its original position.
Optional Equipment
A
4-11