Split Mode - Kyocera KM-2050 Basic Operation Manual

Basic Operation

Split Mode

2 sided
Book
3-12
Use this mode to produce one-
sided copies from two-sided or
double-page spread originals, for
example a magazine or book.
The following Split Modes are available:
Mode
1 sided One-sided copies are produced from two-sided originals.
The following Original Stitch Side options are available:
• Left Side
the second side of the originals are copied without rotation
to ensure correct image orientation on output copies.
• Top Side
the second side of the originals are rotated 180 degrees to
ensure correct orientation on output copies.
1 sided One-sided copies are produced from a double-page spread
original, for example a magazine or book.
NOTE:
B5R, A5R, 11 × 17" (Ledger) and 8
paper sizes are limited to 11 × 8
A4, and B5 for metric specifications.
The paper size can be changed and the zoom ratio adjusted to
fit the size of the paper.
1
Description
1
Original
Binding edge at left of originals: The images on
Binding edge at top of originals: The images on
1 2
The original sizes that can be used are A3, B4, A4R,
2
1
1 1
Original Copy
1 2
Copy
1 2
× 11" (Letter). The
1/2
" for inch specifications and
1/2
BASIC OPERATION GUIDE
2
2