Optional Equipment
Names of Parts
Placing Originals in the Document Processor
4-4
1
Original Table — Place
originals to be copied
on this table.
2
Original Insert Guides
— Align these guides to
fit the width of the
originals to be copied.
3
Left Cover — Open this
cover if an original jam
occurs.
4
Original Eject Table —
Originals that have
been copied are ejected
and stored here.
5
Ejection Extension — Open this extension when using larger sized
originals such as A3, B4, 11 × 17" (Ledger), and 8
6
Document Processor Release Grip — Hold this grip to open or
close the Document Processor.
7
Ejection Tray — Two-sided originals will be temporarily ejected
here.
IMPORTANT: Ensure the Document Processor is closed whenever
transporting the machine.
1
Adjust the original insert guides to
fit the width of the original(s).
IMPORTANT: To prevent jams,
remove any originals remaining
on the Original Eject Table and
fan the originals to separate the
sheets before loading them.
When setting multiple originals at
one time, use originals of the
same size. It is, possible to use
different size originals of the same
width (for example, 11 × 17"
(Ledger) and 11 × 8
selection mode. Refer to Chapter 1, Advanced Operation Guide.
3
" or A4 and A3) at the same time in the auto
1/2
2
1
2
4
7
6
× 14" (Legal).
1/2
BASIC OPERATION GUIDE
5