Basic Copying Procedure - Kyocera KM-2050 Basic Operation Manual

Basic Operation

Basic Copying Procedure

3-2
1
Open the main power switch
cover on the right side of the
machine and press the Power
Switch to On ( | ).
At the end of warm-up, the Start
indicator lights.
2
Open the Original Cover and
place the original face-down onto
the Platen. Align the original flush
up against the left rear corner of
the Platen.
NOTE:
If the optional Document Processor is installed on your machine,
refer to Document Processor, on page 4-3.
3 Select the paper required.
If Auto displays, copy paper the
same size as the original is
automatically selected.
Press [Paper Select] to change
the paper selection.
NOTE:
To disable the Auto Paper Selection function. Refer to Chapter 3,
Advanced Operation Guide.
You can specify which cassette will be automatically selected. For details,
refer to Chapter 3, Advanced Operation Guide.
Ready to copy.
Auto Auto
100%
BASIC OPERATION GUIDE
1