Hard Disk; Expansion Memory - Kyocera KM-2050 Basic Operation Manual

Hard Disk

Expansion Memory

BASIC OPERATION GUIDE
The Hard Disk is used for print
data storage. To use all the e-
MPS functions, the Hard Disk
must be installed.
Capacity: 340 MB, 512 MB, 1 GB
For details about e-MPS
functions, refer to Chapter 2,
Advanced Operation Guide.
It is possible to increase the
memory in your machine. Adding
additional memory will increase
the number of originals that can
be scanned at one time. An
additional 64 MB or 128 MB is
effective when copying from
originals with photos, due to their
normally low compression ratio.
Memory Available:
• For copier: 16 MB, 32 MB, 64 MB, 128 MB
• For printer: 32 MB, 64 MB, 128 MB, 256 MB
Number of originals that can be scanned (A4 originals of 6 % coverage,
Text + Photo mode):
16 MB
289 sheets
(179 sheets)
The values within ( ) are those for the machine with the optional Network Scanner
kit installed.
IMPORTANT: The expansion memory should only be installed by your
dealer. We shall not be liable for any damages caused by improper
installation of expansion memory.
32 MB
392 sheets 597 sheets
(282 sheets) (487 sheets)
Optional Equipment
64 MB 128 MB
1006 sheets
(896 sheets)
4-15