Registering The Default Gateway - Kyocera KM-2050 Basic Operation Manual

Registering the Default Gateway

BASIC OPERATION GUIDE
Continue from the previous Step 3 to register the Default Gateway.
NOTE:
If you are not sure of the appropriate Default Gateway address,
contact your Network Administrator.
1 Access the TCP/IP Setting screen.
2
Press or to select Gateway
and press [Enter].
3
Enter the Gateway address using
the same procedure used for the
IP Address in steps 8 - 9 of IP
Address Setting.
Press [Enter] when the entire address has been entered.
4 When you have entered all the
network settings, press [Reset].
The Printer Basic screen displays.
TCP/IP Setting
IP Address
Subnet Mask
Gateway
Gateway
0 . 0 .
Preparation
0 . 0
2-15