Kyocera KM-2050 Basic Operation Manual page 102

Troubleshooting
Message
Unable to copy.
Please Add Toner
or
Cannot copy.
Add toner, resume copyi
ng.
Replace Waste Toner
Box
Clean the slit glass for
original fed from DP.
or
Clean the slit glass
original fed from DP.
Call for service.
Time for maintenance
6-6
The Toner Container is empty.
Replace the Toner Container.
The Waste Toner Box is full.
Replace the Waste Toner Box.
The Slit Glass is dirty.
Clean the Slit Glass as black lines may appear when the optional
Document Processor is used.
Open the Front Cover and then close it.
If the message displays again, press [Stop/Clear] and check the
number.
Switch off the main power ( ) and contact your Service
Representative or Authorized Service Center.
Periodic maintenance is required to keep the machine in good
condition.
Contact your Service Representative or Authorized Service
Center immediately.
Procedure
Reference
page
page 5-5
page 5-5
page 5-2
—
—
BASIC OPERATION GUIDE