Hardware Setup; Before Using The Box-Pc For The First Time - Contec IPC-BX800-DC400 User Manual

3. Hardware Setup

Before Using the BOX-PC for the First Time

Follow the next steps to set up the BOX-PC:
STEP1 By referring to the information in this chapter, install, connect and set the BOX-PC.
STEP2 Connect cables.
Connect the cable of necessary external devices, such as keyboard and a display, to this
product using appropriate cables.
STEP3 Turn on the power.
After verifying that you have correctly followed steps 1 and 2, turn on the power. If you
feel something is wrong after turning on the power, turn off the power immediately and
check to see if the BOX-PC has been set up correctly.
If the product is started at a low temperature (-20 - 0°C), the OS does not start up until the
temperature goes over 0°C.
STEP4 Set up BIOS.
By referring to Chapter 4, set up BIOS. This setup requires a keyboard and a display.
* Before using the BOX-PC, be sure to execute " LOAD SETUP DEFAULTS" to initialize
the BIOS settings to their default values.
(See Chapter 4, "Main Menu.")
CAUTION
Be sure to connect the keyboard and mouse to it before turning the power on for the first time.
IPC-BX800 Series User's Manual
3. Hardware Setup
11