Hardware Setup; Before Using The Product For The First Time - Contec IPC Series User Manual

3. Hardware Setup

Before Using the Product for the First Time

Follow the next steps to set up this product.
STEP1 By referring to the information in this chapter, install, connect and set this product.
STEP2 Connect cables.
Connect the cable of necessary external devices, such as keyboard and display, to this product
using appropriate cables.
Turn on the Power .
STEP3
After verifying that you have correctly follow steps 1 and 2, turn on the power. If you find any
abnormality after turning on the power, turn it off and check to see if the setup has been
performed properly.
STEP4 Set up BIOS.
By referring to Chapter 4, set up BIOS. This setup requires a keyboard and a display.
※ Before using this product, be sure to execute "Restore Defaults" to initialize the BIOS
settings to their default values.
(See Chapter 4, "Save & Exit")
- Be sure to connect the keyboard and mouse to it before turning the power on for the first time.
- Be sure to connect the display before turning the power on. Connecting the display after turning the
power on may prevent it from being displayed properly.
PT-S2000HX/HXC/LX/LXC Series User's Manual
19