Hardware Setup; Before Using The Panecon-Pc For The First Time - Contec IPC-PT/L600S(PCW)P User Manual

3. Hardware Setup

Before Using the PANECON-PC for the First
Time
Follow the next steps to set up the PANECON-PC:
STEP1
STEP2
STEP3
STEP4
* Before using the PANECON-PC, be sure to execute " LOAD
SETUP DEFAULTS" to initialize the BIOS settings to their
default values.
(See Chapter 4, "Main Menu.")
Note!
If Windows is pre-installed, always connect the keyboard and mouse
before turning on the power for the first time.
IPC-PT/L600S(PCW)C, IPC-PT/L600S(PCW)P, IPC-PT/H600X(PCW)C, IPC-PT/H600X(PCW)P
Install the hard disk and expansion main memory
(DIMM) and set jumper switches.
By referring to the information in this chapter, set the
PANECON-PC.
Connect cables.
Connect necessary external devices, such as a printer
and a CRT, to the PANECON-PC using appropriate
cables.
Turn on the power.
After verifying that you have correctly followed steps
1 and 2, turn on the power. If you feel something is
wrong after turning on the power, turn off the power
immediately and check to see if the PANECON-PC
has been set up correctly.
Set up BIOS.
By referring to Chapter 4, set up BIOS. This setup
requires a keyboard and a display.
Hardware Setup
15