Primary Master, Slave - Contec IPC-BX800-DC400 User Manual

4. BIOS Setup
Keystrokes
Use the keys listed in the legend bar on the bottom to make your selections or exit the current menu. The
chart on the following page describes the legend keys and their alternates:
Table 4.1. How to use the setup program
Key
<F1> or <Alt-H>
<Esc>
← or → arrow keys
↑ or ↓ arrow keys
<Tab> or <Shift-Tab>
<Home> or <End>
<PgUp> or <PgDn>
<F5> or <->
<F6> or <+> or <Space>
<F9>
<F10>
<Enter>
<Alt-R>
You can make the following selections on the Main Menu itself. Use the sub menus for other selections.
Feature
System Time HH:MM:SS
System Date MM/DD/YYYY
Primary Master This field is set to
[AUTO] by default. You
can leave it intact for
Primary Slave
normal use.
System Memory N/A
Extended Memory N/A
*1 Please do not connect it of the slave alone.
You can set the boot sequence of the bootable drives by opening the Boot Menu.

Primary Master, Slave

The Master and Slave sub-menus accessed from the Main Menu control these types of devices:
Hard-disk drives
- CF, HDD
- CD-ROM drives
This product supports IDE port for primary only. Connection by the slave alone cannot be done. Please
connect it with the master when connected device is one.
18
General Help window (See below).
Exit this menu.
Select a different menu.
Move cursor up and down.
Cycle cursor up and down.
Move cursor to top or bottom of window.
Move cursor to next or previous page.
Select the Previous Value for the field.
Select the Next Value for the field.
Load the Default Configuration values for this menu.
Load the Previous Configuration values for this menu.
Execute Command or Select P Submenu.
Refresh screen.
Options
Set the system time.
Set the system date.
Set to the type of the drive on primary IDE master.
Set to the type of the drive on primary IDE master. *1
Displays amount of conventional memory detected during
boot up.
Displays the amount of extended memory detected during
boot up.
Function
Description
IPC-BX800 Series User's Manual