Table of Contents
Advertisement
IDE Features
Main Advanced Security Power PC_Health Boot Exit
IDE Features
IDE - Device 31, Function 1:
Local Bus IDE adapter:
Hard Disk Pre-Delay:
SMART Device Monitoring:
Figure 4.6. IDE Features Window (Factory Settings)
Please use basically with default setting.
Feature
IDE - Device 31,
Disabled
Function 1
Enabled
Local Bus IDE adapter Disabled
Enabled
Primary
Both
Hard Disk Pre-Delay
Disabled
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
18 seconds
21 seconds
30 seconds
SMART device
Disabled
monitoring
Enabled
IPC-BX800 Series User's Manual
[Enabled]
[Primary]
[Disabled]
[Enabled]
Options
Enable or Disable the IDE Controller.
The IDE channels setting.
Adds a delay before the first access of a hard disk by the
BIOS. Some hard disks hang if accessed before they have
initialized themselves. This delay ensures the hard disk
has initialized after power up, prior to being accessed.
Turn on Self-Monitoring Analysis-Reporting Technology,
which monitors condition of the hard drive and reports
when a catastrophic IDE failure is about to happen
Description
4. BIOS Setup
23
Advertisement
Table of Contents
