Supported Os - Contec IPC-BX800-DC400 User Manual

1. Introduction
Operation guaranteed in a temperature range from -20 to +60°C with a vibration resistance of 5G and an
impact resistance of 100G
The radiation structure with a built-in heater and the cabinet ensures a stable operation at any
temperature between -20 and +60 °C. With a vibration resistance of 5G and an impact resistance of
100G, the product can also be used for mobile devices.
Safety design required for embedded applications
Unnecessary trouble can be avoided by the use of insulation lock clamps for prevention of cable
disconnection and the use of metal fittings for prevention of CF card disconnection.
An abnormal voltage or temperature is detected to shut down the system automatically.
Retention of CMOS data by EEPROM allows the system to start up even when the battery has run out.
Windows XP Embedded EWF function allows the power to be switched off without shutting down the
system. For OS-installed Models, Windows XP Embedded EWF function allows the power to be
switched off without shutting down the system.
* EWF (Enhanced Write Filter) is a function specific to Windows XP Embedded that protects the disk from being actually written by
redirecting the writing to RAM.
The adoption of a fan-less, CF card configuration providing high levels of reliability and quietness
As the cabinet itself forms an aluminum heat sink without a fan and with a CF card (bootable) as the
storage device, high levels of reliability and quietness have been achieved.
A wide range of power supplies (12 - 24VDC) supported
Supporting a wide range of power supplies (12 - 24VDC) allows the power to be supplied even from the
battery inside a mobile device.
Various installation methods available
Since the adoption of a CF card and sealed structure frees the product from installation limitations, it can
be installed on a ceiling, wall or floor using the attached metal fixings.

Supported OS

- Windows XP Embedded
2
IPC-BX800 Series User's Manual