I/O Features - Contec IPC-BX800-DC400 User Manual

I/O Features

Main Advanced Security Power PC_Health Boot Exit
Serial port A:
Base I/O address:
Interrupt:
Serial port B:
Base I/O address:
Interrupt:
Serial port C:
Base I/O address:
Interrupt:
Serial port D:
Base I/O address:
Interrupt:
Serial port E (Internal):
Base I/O address:
Interrupt:
Figure 4.11. IO Features Window (Factory Settings)
The CPU communicates with external devices through devices called Input/Output (I/O) ports such as
serial and parallel ports. Theses I/O devices require the use of system resources such as I/O addresses
and interrupt lines. Serial Port E (internal) is used by the system.
To obtain temperature information or log information using the utilities attached to this product, set the
utilities to "Enable".
For details, see the utilities HELP section on the CD-ROM [IPC-SLIB-01] attached to this product.
IPC-BX800 Series User's Manual
IO Features
[Enabled]
[3F8]
[IRQ 4]
[Enabled]
[2F8]
[IRQ 3]
[Enabled]
[3E8]
[IRQ 5]
[Enabled]
[2E8]
[IRQ 7]
[Enabled]
[220]
[IRQ 15]
4. BIOS Setup
27