Installation Requirements - Contec IPC-BX800-DC400 User Manual

Installation Requirements

Take care that the operating temperature range may be limited depending on the installation direction.
In addition, take appropriate measures so that the ambient temperature falls within the range of
installation environment conditions, such as keeping the system unit well-ventilated and sufficiently
spaced its surroundings.
With a vibration resistance of 5G and an impact resistance of 100G, the product can also be installed in
a mobile device.
Installation direction for use in an operation temperature range from -20°C to +60°C : (1)
Installation direction for use in an operation temperature range from -20°C to +55°C :
(1), (2), (3), (4), (5)
Installation direction for use in an operation temperature range from -20°C to +50°C : All
(1)
SERIAL1
CF
DC-IN
RE SET DIP-SW
LINE-OUT MIC
LVDS
*
(2)
Connectors
Figure 3.7. Installation Orientation
CAUTION
Cooling air must be blown to this product, if it is used at a high temperature, even when the
temperature is within the range of the temperature specifications.
IPC-BX800 Series User's Manual
SERIAL2 SERIAL3
VGA
LINK/ TIX 100
LAN
(4)
(3)
Connectors
(5)
DC-IN
RESET DIP-SW
3. Hardware Setup
(6)
Ceiling
(7)
Ceiling
SERIAL1 SERIAL2 SERIA L3
CF
LINE-OUT MIC
LVDS VGA
LINK/TIX 100
LAN
(8)
Floor
15