Configuring Snmpv1 And Snmpv2C Settings - HP 5800 Series Configuration Manual

Configuring SNMPv1 and SNMPv2c settings

Step
1. Enter system view.
2. Enable SNMP agent.
3. Create or update MIB view information.
4. Configure
SNMP
NMS
access
right.
Configure an
Directly SNMP
community.
Configure an
SNMP group.
Indirectly
Add a user to
the SNMP
group.
Command
system-view
snmp-agent
snmp-agent mib-view
{ excluded | included }
view-name oid-tree [ mask
mask-value ]
snmp-agent community
{ read | write }
community-name [ acl
acl-number | mib-view
view-name ]*
snmp-agent group { v1 |
v2c } group-name
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
snmp-agent usm-user { v1 |
v2c } user-name group-name
[ acl acl-number ]
73
Remarks
—
Optional.
Disabled by default.
Enable SNMP agent with this
command or any command
that begins with snmp-agent.
Optional.
By default, the MIB view
name is ViewDefault and
OID is 1.
Required.
Use either approach.
The direction configuration
approach is for SNMPv1 or
SNMPv2c. The community
name configured on the
NMS should be consistent
with the username configured
on the agent.
The indirect configuration
approach is for SNMPv3.