Saving The Current Configuration; Displaying And Maintaining Cli - HP 5800 Series Configuration Manual

To modify the command level:
Step
Enter system view
Configure the command level in a
specified view

Saving the current configuration

On the device, enter the save command in any view to save all submitted and executed commands into the
configuration file. Commands saved in the configuration file can survive a reboot. The save command does
not take effect on one-time commands, such as display commands, which display specified information, and
reset commands, which clear specified information. The one-time commands executed are never saved.

Displaying and maintaining CLI

Task
Display defined command aliases and
the corresponding commands.
Display the clipboard information.
Command
system-view
command-privilege level level view
view command
Command
display command-alias [ | { begin |
exclude | include } regular-expression ]
display clipboard [ | { begin | exclude |
include } regular-expression ]
21
Remarks
—
Required
See Table 1 for the default settings.
Remarks
Available in any view
Available in any view