Configuring None Authentication For Modem Login - HP 5800 Series Configuration Manual

password on the remote authentication server. For more information about authentication modes and
parameters, see Security Configuration Guide. Keep your username and password.
The following table lists modem login configurations for different authentication modes:
Authentication
mode
None
Password
Scheme
NOTE:
Modem login authentication changes do not take effect until you exit the CLI and log in again.

Configuring none authentication for modem login

Prerequisites
You have logged in to the device.
By default, log in to the device through the console port without authentication and have user privilege level
3 after login. For information about logging in to the device with the default configuration, see
"Configuration
Configuration
Configure not to authenticate users.
Configure the device to authenticate users by using the
local password.
Set the local password.
Configure the authentication scheme.
Remote AAA
authentication
Select an
authentic
ation
scheme.
Local authentication
requirements."
Configure a
RADIUS/HWTACAC
S scheme.
Configure the AAA
scheme used by the
domain.
Configure the
username and
password on the AAA
server.
Configure the
authentication
username and
password.
Configure the AAA
scheme used by the
domain as local.
55
Remarks
For more information, see
"Configuring none
authentication for modem
login."
For more information, see
"Configuring password
authentication for modem
login."
For more information, see
"Configuring scheme
authentication for modem
login."