Displaying And Maintaining Cli Login - HP 5800 Series Configuration Manual

Displaying and maintaining CLI login

Task
Display the source IP address/
interface specified for Telnet
packets.
Display information about the user
interfaces that are being used.
Displays information about all user
interfaces that the device supports.
Display user interface information.
Release a specified user interface.
Lock the current user interface.
Send messages to the specified
user interfaces.
Command
display telnet client
configuration [ | { begin
| exclude | include }
regular- expression ]
display users [ | { begin
| exclude | include }
regular- expression ]
display users all [ |
{ begin | exclude |
include } regular
-expression ]
display user-interface
[ num1 | { aux | vty }
num2 ] [ summary ] [ |
{ begin | exclude |
include } regular-
expression ]
free user-interface
{ num1 | { aux | vty }
num2 }
lock
send { all | num1 |
{ aux | vty } num2 }
63
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.
Multiple users can log in to the system to
simultaneously configure the device. In some
circumstances, when the administrator wants
to make configurations without interruption
from the users that have logged in through
other user interfaces, the administrator can
execute the command to release the
connections established on the specified user
interfaces.
You cannot use this command to release the
connection you are using.
Available in user view.
By default, the current user interface is not
locked.
Available in user view.