SteelFlex Treadmill User Manual page 20

Table of Contents

Advertisement

Heart rate checks are made every 15 seconds-
A. If heart rate is less that 50 bpm, (regardless of target), elevation
will move to 0%, after 0%, speed will reduce by 0.1 mph every
15 seconds, when minimum speed is reached, end exercise will
occur.
B. If heart rate is less than 3 bpm below target, there will be no
change.
C. If heart rate is between 3 and 5 bpm below target, elevation will
increase by 0.5% every 30 seconds.
D. If heart rate is between 6 and 10 bpm below target, elevation
will increase by 1% every 30 seconds.
E. If heart rate is between 11 and 20 bpm below target, elevation
will increase by 1% every 15 seconds.
F. If heart rate is more than 20 bpm below target, no change will
occur, as system assumes that there may be an error in the heart
rate signal. User must ensure that Chest Strap is working properly.
G. If heart rate is less than 3 bpm Above target, there is no change.
H. If heart rate is more than 3 bpm Above target, elevation will
decrease by 1% every 15 seconds. When elevation reaches 0%,
then speed will begin lowering 0.1 mph every 15 seconds, until
minimum is reached or heart rate is on target range.
USER CAN AND SHOULD STOP HEART RATE CONTROL
PROGRAM AT ANY TIME FOR ANY OVERWORK OR OUT OF
RANGE CONDITION, JUST BY PRESSING ANY STOP BUTTON,
OR REMOVING THE SAFETY KEY.
Press "
elevation / incline.
19
OPERATING INSTRUCTIONS
", when asked in the scrolling display to enable

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents