Leveler Legs - SteelFlex Treadmill User Manual

INSTALLATION
GROUNDING INSTRUCTIONS
The treadmill must be properly grounded prior to use. Proper
grounding reduces the risk of shock or damage to the treadmill.
The power cord's plug is equipped with a grounding conductor
that must be used with an electrical outlet installed in accordance
to all local codes and ordinances. DO NOT use a temporary
adapter that bypasses this function. This will stop the safety
equipment from functioning properly and may void your warranty.
DO NOT MODIFY the plug provided with this product. If it will not fit
an electrical outlet, have a proper outlet installed by a qualified
electrician.

LEVELER LEGS

After finding a location that is suitable for the treadmill, the rear legs
must be adjusted to provide stable support. Located on the side of each
leg is a thumb-wheel that will allow you to lower or raise the leg until it
is properly seated on the floor.
DO NOT adjust legs while the
treadmill is on. Turn the power
switch to the OFF position
before adjustment.
7