Hitachi RCI-1.0FSN3 Service Manual page 63

2 Unit installation
RPI-(2.0-6.0)FSN4E
Change in position of the air inlet on RPI-(2.0-6.0)FSN4E models: the position of the air inlet and, therefore, its direction
can be modified by changing the position of the rear cover, as shown in the illustrations.
1
A
2
1 Initial position -A- of the air inlet (factory-supplied).
2 Air inlet and bottom cover away from the unit.
3 Interchange air inlet and cover position.
4 Final position -B- of the air inlet.
51
SMGB0077 rev.0 - 01/2013
4
B
3
2