Hitachi RCI-1.0FSN3 Service Manual page 100

2 Unit installation
Specifications
Part
Applicable indoor unit model
Dust collection efficiency (%)
Air flow rate (m /min)
3
Initial pressure loss Pa
Final pressure loss Pa
Filter/frame colour
Working life
Reuse
Cleaning
Weight (kg)
Performance
Antibacterial fiber
Filter material
Reinforce net
Reinforce sheet
Applicable filter box (option)
Restrictions of use
This is the standard working life of the filter and its duration may vary depending on the conditions of use. Clean the filter
(*1)
with water or neutral detergent.
Wash the filter with water or neutral detergent to avoid reducing the absorption capacity.
(*2)
For RCI-FSN3Ei indoor units: F-23L4-D and F-46L4-D
The dimensions of the deodorising filter are indicated in the
following figure.
Remember that the filter thickness depends on the model.
Model
RCI-(1.5-2.5)FSN2E
RCI-(3.0-6.0)FSN2E
To fit the filter, you must install the filter box.
N O T E
When using this filter, set the air flow to high speed using the remote control to maintain the necessary volume
of air.
88
SMGB0077 rev.0 - 01/2013
F-71L-D1
1.0 to 2.5
50 (gravimetric method)
22.0
19.0
48.0
3 years (with maintenance every 3-6 months)
Available (dried by sunlight)
Available (washed with water)
0.8
Absorbs smoke, body odour, etc.
Acrylate Fiber 1 (Absorbed fiber for basic gas)
Acrylate Fiber 2 (Absorbed fiber for acidic gas)
Washing with detergents is forbidden
a (mm)
26
42
F-160L-D1
3.0 to 6.0
35.0
36.0
78.0
Pink/Silver
(*1)
(*2)
1.2
PP/PE
PP
B-160H2