List Of Ldap Settings - Konica Minolta bizhub 163 User Manual

Network settings
*1: Necessary if notification of the URL is to be sent by e-mail.
*2: Can also be obtained automatically from the DHCP server.
*3: Set the IP address to "0.0.0.0" if there is no usable SMTP server on the
network.
*4: The setting must be specified in order to use direct faxing. For details on
direct faxing, refer to the User's Guide for fax kit FK-506.
*5: The setting must be specified in order to use Internet faxing. For details
on Internet faxing, refer to the User's Guide for fax kit FK-506.
*6: Necessary in order to use POP Before SMTP.
*7: Necessary in order to use POP Before SMTP and if notification of the URL
is to be sent by e-mail.

List of LDAP settings

Specify these settings when using an LDAP (Lightweight Directory Access
Protocol) server.
Parameter
LDAP SERVER AD-
DRESS
LDAP PORT NO.
SSL SETTING
SEARCH BASE
Attribute for Operation
Panel
Attribute for Web tool
IC-206
Description
Specify the IP address or host name
for the LDAP server. Consult with the
network administrator.
Specify the port number (between 1
and 65535) used for communicating
with the LDAP server. Consult with the
network administrator.
Select whether or not SSL is used to
encode the transmission data.
Specify where to start the search in the
name space of the LDAP server. Con-
sult with the network administrator.
Specify the search attributes when us-
ing the control panel to search for des-
tinations on the LDAP server. Consult
with the network administrator.
Specify the search attributes when us-
ing PageScope Web Connection to
search for destinations on the LDAP
server. Consult with the network ad-
ministrator.
7
Settings
Machine Page-
control Scope Web
panel Connec-
tion
o: Can be set; -: Cannot
be set
o o
o o
o o
o o
o o
- o
7-5