Editing Or Deleting A Speed Dial Destination - Konica Minolta bizhub 163 User Manual

8
– To correct destination, press the [Clear/Stop] to erase it, and then
type in the correct destination.
The destination is displayed.
8
Press the [OK] key.
After the message "REGISTERED" appears, the "DIAL REGISTRA-
TION" menu appears again.
Note
If an edited one-touch dial destination is registered with a group dial des-
tination, the following screen appears.
Press the [,] or [+] key until "YES" or "NO" is selected, and then press
the [OK] key.
Whether "YES" or "NO" is selected, the message "REGISTERED" ap-
pears, and then the "DIAL REGISTRATION" menu appears again.

Editing or deleting a speed dial destination

1
Press the [Utility] key in the control panel.
8-20
Registering destinations
IC-206