Specifying The Ldap Password; Specifying The Domain Name - Konica Minolta bizhub 163 User Manual

7

Specifying the LDAP password

1
In the "LDAP SETTING" menu, press the [+] or [,] key until "LDAP
PASSWORD" is selected, and then press the [OK] key.
2
Type in the password.
– The password can contain a maximum of 32 characters.
– For the password, consult with the network administrator.
– If the setting was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
3
Press the [OK] key.
After the message "ACCEPTED" appears, the "LDAP SETTING" menu
appears again.

Specifying the domain name

1
In the "LDAP SETTING" menu, press the [+] or [,] key until "DOMAIN
NAME" is selected, and then press the [OK] key.
7-44
Network settings
IC-206