Konica Minolta bizhub 163 User Manual page 349

11
Item
Sender name
E-Mail Address
Port Number
SMTP Server
Timeout
Text Insert
Basic Mode/Ad-
vanced Mode
Max. TX Size
Max. Resolution
Coding Mode
POP3 Server Ad-
dress
Account Name
Password
Auto Reception
INTERVAL
Reply Address
Port Number
POP3 Server
Timeout
Header Print
11-72
Description
Specify the sender name used when sending scan data attached to an e-
mail message. (maximum 20 characters)
Specify the e-mail address of the sender. (maximum 64 characters)
Specify the port number (between 1 and 65535) of the SMTP server. Nor-
mally, port number 25 is used.
Specify the amount of time until communication with the SMTP server
times out (between 30 and 300 seconds).
Select to insert the body text of the e-mail message.
Select the e-mail mode (basic mode or advanced mode) to be used for
sending documents as Internet faxes.
Specify the maximum size for transmissions with advanced mode.
Specify the maximum resolution for transmissions with advanced mode.
Specify the maximum compression encoding method for scan data to be
sent with advanced mode.
Specify the IP address or host name for the POP3 server. (maximum 64
characters)
Specify the account name used to log on to the POP3 server. (maximum
64 characters)
Specify the password used to log on to the POP3 server. (maximum 32
characters)
Select whether or not the Auto Reception function is used.
Specify the time interval (between 1 and 60 minutes) for checking for new
e-mail messages during automatic reception.
Specify the e-mail address where a reply is sent to error messages. If an
error occurs, a reply to the error message is sent to the e-mail address
specified here. Normally, the e-mail address of the administrator is speci-
fied. (maximum 64 characters)
Specify the port number (between 1 and 65535) of the POP3 server. Nor-
mally, port number 110 is used.
Specify the amount of time (between 30 and 300 seconds) until the con-
nection with the POP3 server times out.
Select whether or not the header (title or sender) is printed.
Using PageScope Web Connection
IC-206