3
3
Type in the administrator access code, and then press the [OK] key.
–
The manufacturer's default setting is "000000".
–
If the code was incorrectly entered, press the [Clear/Stop] key to
erase the number, and then type it in correctly.
4
Press the [,] or [+] key until "NETWORK SETTING" is selected, and
then press the [OK] key.
–
If fax kit FK-506 is installed
5
In the "NETWORK SETTING" menu, press the [,] or [+] key until "IP
ADDRESS SETTING" is selected, and then press the [OK] key.
3-10
Network printing
IC-206