Checking Ipp-Related Settings From Pagescope Web Connection - Konica Minolta bizhub 163 User Manual

Network printing
Reminder
Before specifying settings, check that the following preparations have
been completed.
The computer can communicate using the TCP/IP protocol.
This machine can communicate using the TCP/IP protocol.
The printer driver is installed on the computer.
(For details on installing the PCL driver, refer to "Installing the printer driv-
er by using the Add Printer Wizard" on page 2-15. If the GDI driver is to
be installed, refer to the User's Guide for the GDI printer controller, in-
cluded with this machine.)

Checking IPP-related settings from PageScope Web Connection

For details on PageScope Web Connection, refer to "Using PageScope Web
Connection" on page 11-1.
1
Start up PageScope Web Connection.
2
Type in the password to log on to the Administrator mode.
– For the password, consult with the network administrator.
3
Click the Network tab, and then click "IPP Configuration" in the menu.
4
Make sure that the "Enable IPP" check box is selected. If the check box
is not selected, IPP printing cannot be performed.
IC-206
3
3-19