Specifying The Dns Settings - Konica Minolta bizhub 163 User Manual

Network settings
Reminder
In order to apply the new settings, the machine must be turned off, then
on again to be restarted.

Specifying the DNS settings

1
In the "NETWORK SETTING" menu, press the [,] or [+] key until "DNS
CONFIG." is selected, and then press the [OK] key.
2
Press the [,] or [+] key until "DISABLE" or "ENABLE" is selected, and
then press the [OK] key.
– If "DISABLE" is selected, the message "ACCEPTED" appears, and
then the "NETWORK SETTING" menu appears again.
– If "ENABLE" was selected, a screen appears, allowing you to spec-
ify the IP address of the DNS server. Continue with step 3.
3
Use the keypad to type in the IP address of the DNS server.
– For the IP address of the DNS server, consult with the network ad-
ministrator.
IC-206
7
7-13