D-Link DES-1228 Reference Manual page 52

Example usage:
To delete a trusted host network with an IP address 10.62.0.0/16:
DES-1228/ME:4#delete trusted_host network 10.62.0.0/16
Command: delete trusted_host network 10.62.0.0/16
Success.
DES-1228/ME:4#
delete trusted_host all
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete all trusted host entries:
DES-1228/MEG:4# delete trusted_host all
Command: delete trusted_host all
Success.
enable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SNMP trap support on the Switch:
DES-1228/ME:4#enable snmp traps
Command: enable snmp traps
Success.
DES-1228/ME:4#
enable snmp authenticate traps
Purpose
Syntax
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to delete all trusted host entries made using the create trusted_host ipaddr and
create trusted_host network commands above.
delete trusted _host all
This command is used to delete all trusted host entries made using the create
trusted_host ipaddr and create trusted_host network commands above.
None.
Only Administrator-level users can issue this command.
Used to enable SNMP trap support.
enable snmp traps
The enable snmp traps command is used to enable SNMP trap support on the Switch.
None.
Only Administrator-level users can issue this command.
Used to enable SNMP authentication trap support.
enable snmp authenticate traps
47