D-Link DES-1228 Reference Manual page 16

create account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an administrator-level user account with the username "dlink".
DES-1228/ME:4#create account admin dlink
Command: create account admin dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DES-1228/ME:4#
config account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the user password of "dlink" account:
DES-1228/ME:4#config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to create user accounts.
create account [admin | user] <username 15>
The create account command is used to create user accounts that consist of a username
of 1 to 15 characters and a password of 0 to 15 characters. Up to 8 user accounts can be
created.
admin <username>
user <username>
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Used to configure user accounts
config account <username>
The config account command configures a user account that has been created using the
create account command.
<username>
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 35 characters.
11