D-Link DES-1228 Reference Manual page 50

Example usage:
To create the trusted host:
DES-1228/ME:4#create trusted_host 10.48.74.121
Command: create trusted_host 10.48.74.121
Success.
DES-1228/ME:4#
create trusted_host network
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the trusted host network:
DES-1228/ME:4#create trusted_host network 10.48.74.121/16
Command: create trusted_host network 10.48.74.121/16
Success.
DES-1228/ME:4#
show trusted_host
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to create the trusted host subnet.
create trusted_host network <network_address>
The create trusted host network command creates the trusted host subnet. The Switch
allows users to specify up to ten IP network addresses that are allowed to manage the
Switch via in-band SNMP or TELNET based management software. These IP addresses
must be members of the Management VLAN. If no IP addresses are specified, then there
is nothing to prevent any IP address from accessing the Switch, provided the user knows
the Username and Password.
<network_address> − The IP address and netmask of the trusted host to be created.
Only Administrator-level users can issue this command.
Used to display a list of trusted hosts entered on the Switch using the create
trusted_host command above.
show trusted_host
This command is used to display a list of trusted hosts entered on the Switch using the
create trusted_host command above.
None.
Only Administrator-level users can issue this command.
45