D-Link DES-1228 Reference Manual page 293

Example usage
To display all of the commands in the CLI:
DES-1228/ME:4#?
..
?
cable_diag ports
clear
clear arptable
clear counters
clear fdb
clear flood_fdb
clear igmp_snooping data_driven_group
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x guest_vlan ports
config 802.1x init
config 802.1x reauth
config access_profile profile_id
config account CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
To display the parameters for a specific command:
DES-1228/ME:4#? config stp
Command: ? config stp
Command: config stp
Usage: {maxage <value 6-40>|maxhops <value 6-40> |hellotime <value 1-2>| forwar
ddelay <value 4-30>|txholdcount <value 1-10>|fbpdu [enable|disable]|lbd [enable|
disable] |lbd_recover_timer [<value 0> | <value 60-1000000>]}
Description: Used to setup STP on the switch.
config stp instance_id
config stp mst_config_id
config stp mst_ports
config stp ports
config stp priority
config stp trap
config stp version
DES-1228/ME:4#
dir
Purpose
Syntax
Description
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to display all commands in the Command Line Interface (CLI).
dir
This command will display all of the commands available through the Command Line
Interface (CLI).
288