D-Link DES-1228 Reference Manual page 23

To save the Switch's current configuration to non-volatile RAM:
DES-1228/ME:4#save
Command: save
Saving all configurations to NV-RAM...
Success.
DES-1228/ME:4#
reboot
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
DES-1228/ME:4#reboot
Command: reboot
Are users sure want to proceed with the system reboot? (y|n)
Please wait, the switch is rebooting...
reboot force_agree
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To force the Switch to restart:
DES-1228/ME:4#reboot force_agree
Command: reboot force_agree
Please wait, the switch is rebooting...
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to restart the Switch.
reboot
This command is used to restart the Switch.
None.
Only Administrator-level users can issue this command.
Used to force the Switch to restart.
reboot force_agree
This command is used to force the Switch to restart.
None.
Only Administrator-level users can issue this command.
Done.
18