Before You Begin - Follett C125A Installation, Operation And Service Manual

Follett ice dispensers enjoy a well-deserved reputation for excellent performance, long-term reliability and outstanding
after-the-sale support. To ensure that this dispenser delivers that same degree of service, we ask that you review the
installation portion of this manual before beginning to install the dispenser. Our installation instructions are designed to
help you achieve a trouble-free installation. Should you have any questions or require technical help at any time, please
call our technical service group at (800) 523-9361, (888) 2-FOLLETT or (610) 252-7301.
Following installation, please forward this manual to the appropriate operations person.

Before you begin

• After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If
damage is found, notify your shipper immediately and contact Follett Corporation for help in filing a claim, if
necessary.
• Check your paperwork to determine which model dispenser you have. Follett model numbers are designed
to provide information about the type and capacity of Follett ice dispensing equipment. Following is an
explanation of model numbers:
C125A
Important cautions
!
• Do NOT tilt any unit further than 30° off vertical during uncrating or installation
• Dispenser bin area contains mechanical, moving parts. Keep hands and arms clear of this
area at all times. If access to this area is required, power to unit must be disconnected first.
• Follett recommends installation of an activated carbon filter in icemaker inlet water line
• Ice is slippery. Maintain counters and floors around dispenser in a clean and ice-free condition.
• Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.
• Do not block right side air intake or top air exhaust
Welcome to Follett
Condenser type – A = air-cooled
Icemaker capacity and refrigerant – 5 = 400 lbs (181kg)/day, R22 refrigerant
Approximate storage capacity in lbs
Dispenser configuration – C = countertop, H = wall mount
4