Follett Champion 7 Installation Manual
Ice and water dispenser with chewblet ice machine
Hide thumbs
Also See for Champion 7:
- Installation manual (33 pages) ,
- Installation, operation and service manual (70 pages)
Table of Contents
Advertisement
Quick Links
Welcome to Follett
Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding
after-the-sale support. To ensure that this equipment delivers that same degree of service, review this guide
carefully before you begin your installation.
Should you have need technical help, please call our Technical Service group at (877) 612-5086 or (610) 252-7301.
Please have your model number, serial number and complete and detailed explanation of the problem when
contacting Technical Service.
Getting Started
After uncrating and removing all packing material. Inspect the equipment for concealed shipping damage. All freight
is to be inspected upon delivery. If visible signs of damage exist, please refuse delivery or sign your delivery receipt
"damaged." Follett Customer Service must be notified within 48 hours. Wherever possible, please include detailed
photos of the damage with the original packaging so that we may start the freight claim process.
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
Please visit https://www.follettice.com/technicaldocuments
for the Operation and Service manual for your unit.
Champion™ 7 and Champion 15
Ice and Water Dispenser
with Chewblet
CI114A, UC114A, UD114A
www.follettice.com/servicevideolibrary
Ice Machine
®
Installation Guide
230 V
Installation and Service Videos:
01545870R00
Advertisement
Table of Contents
Related Manuals for Follett Champion 7
Summary of Contents for Follett Champion 7
- Page 1 If visible signs of damage exist, please refuse delivery or sign your delivery receipt "damaged." Follett Customer Service must be notified within 48 hours. Wherever possible, please include detailed photos of the damage with the original packaging so that we may start the freight claim process.
- Page 2 § This appliance must not be cleaned by a water jet. § User maintence should not be done by children. § Follett recommends a Follett water filter system be installed in the ice machine inlet water line (standard capacity #00130229, high capacity #00978957, carbonless high capacity #01050442).
-
Page 3: Before You Begin
Before You Begin The serial number of your unit is located on the chassis directly behind the front drip tray. The drip tray can be easily removed by pulling it straight forward. The serial number can also be found on top of the condenser. Champion Dispenser and Ice Machine - 230 V... -
Page 4: Specifications
120 lbs (54.4 kg) Note: Base stand ships separate. Ambient Information CAUTION! The Champion 7 and Champion 15 are for indoor use only. Designed for commercial use. Follett is not able to provide in-house services for residential installations. Maximum* Minimum*... -
Page 5: Heat Rejection
Water WARNING! Connect to potable water supply only. § Maximum total dissolved solids (TDS) 400 ppm. Ion exchange filtration or RO can reduce hardness. § Minimum TDS 10 ppm. § Maximum silica 20 mg/L. Reverse osmosis (RO) must be used to remove silica. §... - Page 6 Champion 7 Detailed Drawing - CI Models (with freestanding base) 14.56 in 22.38 in [56.8 cm] [37.0 cm] power switch 6.47 in (16.4 cm) 7.12 in 41.92 in (18 cm) [106.5 cm] IEC C14 Power Connector Champion Dispenser and Ice Machine - 230 V...
- Page 7 Champion 15 Detailed Drawing - CI Models (with freestanding base) 14.56 in 22.38 in [37.0 cm] [56.8 cm] power switch 6.47 in (16.4 cm) 46.80 in 7.12 in [118.9 cm] (18 cm) IEC C14 Power Connector Champion Dispenser and Ice Machine - 230 V...
- Page 8 Champion 7 Detailed Drawing - UC and UD Models 18.61 Dimension E7UC114A E7UD114A (ADA) 33.50 in (85.1 cm) 31.50 in (80 cm) 22.38 in (56.7 cm) 22.38 in (56.7 cm) 14.56 in (37 cm) 14.56 in (37 cm) 6.47 in (16.4 cm)
-
Page 9: Installation
Countertop Installation Fig. 1 The Champion 7 countertop model is designed to fit on counters underneath countertop models standard mounted cabinets, this does not apply to Champion 15 models. minimum 3" (7.6 cm) clearance required 1. -
Page 10: Freestanding Installation
Freestanding Installation Fig. 3 1. 3" (7.62 cm) on each side of dispenser, 2" (5.08 cm) behind for freestanding models electrical/water connection/ventilation (Fig. 3). minimum 3" (7.6 cm) clearance required 2. Rough-in the electrical service and water line. § Electrical: 230 V, single phase, 10A dedicated receptacle required. The dispenser has a detachable 8 ft (2.4 m) cord and plug. - Page 11 6. Complete Potable Water Connection before proceeding. Fig. 6 Secure unit to wall or cove molding with supplied bracket (Fig. 6) to prevent tipping. Note: Fasteners must be supplied by installer. WARNING! Freestanding unit must be secured to wall to prevent tipping. Failure to do could result in personal injury or damage to the unit.
- Page 12 4. Install the angle bracket inside the cabinet,18.15" (46.1 cm) from the Fig. 8 toe kick (Fig. 8.1). The bracket prevents the dispenser from being located/pushed beyond the recommended cabinet space depth. Do not attach the bracket to the dispenser. 18.15”...
- Page 13 2. Unscrew the chute (Fig. 10.2). 3. Remove the one screw securing the front cover (Fig. 10.3). 4. Remove the front cover and set aside. Follett recommends setting the cover on the drip tray, which provides a stable base. Be careful not to stretch or damage any cables connecting the front cover to the unit (Fig.
- Page 14 Note: On rear drain units, ensure that the pinch clamp is closed on the ice storage bin rear drain tube. On hot tank units, ensure that the pinch clamp is closed. 4. Champion 7: mix 2.5 gal. (9.5 L) of water and 1 packet Kay-5 sanitizer. Champion 15: mix 5 gal. (18.9 L) of water and 2 packets Kay-5 sanitizer.
- Page 15 Internal Claris Filter Flushing Sequence If your dispenser has the internal Claris filter option, the water filter must be flushed prior to use. To flush the Claris filter, please complete the steps below. 1. Connect power supply and turn on power switch located on back of unit. 2.
- Page 16 The user interface has several menus that can be accessed for setting up Fig. 12 and servicing the Champion unit. 1. To access the user interface menus, touch the Follett logo (Fig. 12.1), then touch (Fig. 12.2), then touch the Follett logo again (Fig. 18.3).
- Page 17 Entering Clean and Sanitize Mode disables all operations and allows you to safely clean and/or sanitize the ice machine and dispenser. 1. To enter Clean and Sanitize Mode, touch the Follett logo (Fig. 17.1), (Fig. 17.2), then touch the Follett logo again then touch (Fig. 23.3).
- Page 18 6. Remove the one screw securing the front cover (Fig. 22). Fig. 22 Fig. 23 Remove the front cover and set aside. Follett recommends setting the cover on the drip tray, which provides a stable base (Fig. 23). Be careful not to stretch or damage any cables connecting the front cover to the unit.
- Page 19 10. Hot water tank units: Locate the pinch clamp and engage (close) Fig. 26 (Fig. 26). 11. Remove top sheet metal cover and remove cap from bin lid cover. Fig. 27 Screw cap onto dispense chute (Fig. 27). 12. Fill ice bin with hot water (100F - 120F) to melt ice in evaporator. Fig.
-
Page 20: Cleaning And Sanitizing Procedure
§ For protection, rubber gloves and safety goggles (and/or face shield) should be worn when handling SafeCLEAN Plus™. § Do not use bleach, it will damage the dispenser. Required Supplies § Champion 7: 24 oz. (0.71 L) SafeCLEAN Plus™ liquid § Champion 15: 48 oz. (1.42 L) SafeCLEAN Plus™ liquid § Funnel § Bucket §... -
Page 21: Ice Machine And Dispenser
Ice Machine and Dispenser If no power to the unit, please follow the user interface (UI) steps below or refer to the Champion 7/15 service manual at follettice.com. 1. Touch located on the upper right corner of the user interface. Scroll down and select Cleaning and Sanitizing from the menu. - Page 22 Entering Clean Screen Mode disables the User Interface and allows you to clean the outside of the dispenser without accidentally dispensing ice and/ or water. 1. To enter Cleaning Screen Mode, touch the Follett logo (Fig. 32.1), then touch (Fig. 32.2), then touch the Follett logo again (Fig. 32.3).
-
Page 23: Operation
4. Once cup is filled to desired level, release button and remove cup. User Interface From the Home screen, touch the Follett logo, then touch , then touch the Follett logo again. Maintenance Clean Screen §... -
Page 24: Troubleshoot
Preventive Maintenance § Adjust from 1 to 6 month interval based on water chemistry in 1 month increments Interval (see Preventive (Default 6 months) Maintenance Setting table that follows) Filter Interval § Adjust from 1 to 6 month interval based on water chemistry in 1 month increments (Default 6 months) Operation Settings Sleep Mode... - Page 25 To determine the correct preventive maintenance interval for your application, use either the TDS or Hardness tables below. If you use both the TDS and Hardness and your values are not the same, Follett recommends that you use the lowest value (shortest interval). Without evidence of regular preventive maintenance, warranty will be void.
- Page 26 § Dry chassis, locate leak and repair chassis sensors § Reset from user interface menu (Follett, , Follett), Service ➔ Advanced ➔ enter access code ➔ Control Board Reset ➔ yes ➔ § Or, reset control board manually by pressing reset button...
-
Page 27: Machine Status
Machine Status Procedure for viewing status indicators: From the Home screen, touch to enter help screen. Status will be displayed on right side of screen. Fig. 37 Help Screen Example Interface Display Condition Remedy Time Delay Ice bin is full and unit is placed into 15 After 15 minutes unit will exit time delay minute time delay (15 or 30 minutes) Sleep Mode... -
Page 28: Electrical Wiring Diagram
Electrical Wiring Diagram UVC LED RESERVOIR WATER DISPENSE FAILSAFE CONDENSER INTERLOCK UVC LED SOLENOID SOLENOID BLACK DISPENSE CN12 EVAPORATOR BLACK TEMPERATURE BLACK SENSE CN14 JACKETED USER INTERFACE LED6 FS SOL LED5COND FAN CN15 LED14 HEARTBEAT LED1 POWER CN10 RESET CN13 LED2 AUGER GM PURPLE CHASSIS... - Page 29 Control Board Output LEDs and Connections Status Function Power Connector Pins Input/Output Power "ON" 5 VDC Internal — Internal Auger Gear Motor 230/220 VAC 1, 2 Cap, 8 Output Compressor 230/220 VAC 4, 5 Output Condenser Fan 24 VDC 1, 2 Output Failsafe Solenoid 24 VDC...
- Page 30 Champion Dispenser and Ice Machine - 230 V...
- Page 31 Champion Dispenser and Ice Machine - 230 V...
- Page 32 Please visit www.follettice.com/support to complete the Warranty Registration form. Should you have any questions, please contact Follett's technical support group at (877) 612-5086 or (610) 252-7301 and we will be happy to assist you.