Polling Reception - Konica Minolta bizhub C450 Fax Manual

9
9.2

Polling reception

Polling reception enables the FK-502 to send a command to a destination to
receive the document that is either set for transmission on the remote ma-
chine or reserved for polling transmission. This function is convenient when
you prefer to bear the telephone charge instead of the destination.
You can designate two or more destinations for polling reception by using
sequential polling reception.
A sequential polling reception result report prints out upon completion of se-
quential polling reception. A sequential polling RX reservation report prints
out when timer TX is also used.
!
Detail
It may be unable to be used with the other party machine.
Refer to "Sequence polling RX reservation report" on page 12-26 and
"Sequence polling reception report" on page 12-18 for information on the
sequential polling reception reservation report and sequential polling re-
ception result report.
9-6
Polling
C450