Polling Reception - Konica Minolta BIZHUB C250 Operations

Polling
9.2

Polling reception

Polling reception enables the FK-502 to send a command to a destination to
receive the document that is either set for transmission on the remote
machine or reserved for polling transmission. This function is convenient
when you prefer to bear the telephone charge instead of the destination.
You can designate two or more destinations for polling reception by using
sequential polling reception.
A sequential polling reception result report prints out upon completion of
sequential polling reception. A sequential Polling RX reservation report prints
out when Timer TX is also used.
!
Detail
It may be unable to be used with the other party machine.
Refer to "Sequence polling RX reservation report" on page 12-28 and
"Sequence polling reception report" on page 12-18 for information on the
Sequential Polling Reception Reservation Report and Sequential Polling
Reception Result Report.
Polling reception has two options: one is ordinary polling reception, and the
other receives the document reserved in the bulletin board of the destination.
The description below assumes the ordinary polling reception. For the latter,
see "Receive by polling a document written to the bulletin board of a
destination (fax)" on page 9-13.
0 Functions incompatible
Quick Memory TX, Frame Erase, Scan SIze, Number of Originals, Mixed
Original, Bind Position, Confidential TX, Relay TX Req, ECM OFF,
Overseas TX, Polling TX (Normal), Password TX, V.34 OFF, Separate
Scan, Bulletin Board Registration, Polling RX (Bulletin)
bizhub C250 (Phase3)
9
9-7