10
Setting the default of the subject of the e-mail
When sending the e-mail from the fax screen, the subject that has been set
here as an default is sent to the computer. The procedure for setting the de-
fault of the subject of the e-mail is as follows.
1
See "Displaying the fax registration screen" on page 10-3, to display
the fax registration screen.
2
Press [Subject/Text for E-mail].
–
In the utility mode, it is also possible to enter a number displayed in
the key through the keypad for selection. In the case of [Subject/
Text for E-mail], enter the "4" on the keypad.
3
Press [Subject].
10-38
Registering/Settings
C450