Konica Minolta bizhub C450 Fax Manual page 321

Utility mode
7
Use numeric keypad, [+], [SPACE],
[Sender (TSI)] box.
– +
Inputs +.
– Space
Inputs a space.
–
Moves the cursor to left.
–
Moves the cursor to right.
– Delete
Deletes the last letter on each press.
– During transmission, [+] and [SPACE] are ignored.
8
Press [User Box Number] and enter the number of the box into which
a document received is stored.
– You can enter the box no. in the range of 1 to 999999999.
9
Press [OK] and then press [Close].
The TSI RX user box is set.
10
Press [Exit].
The fax RX distribution screen will be restored.
C450
or to input fax ID in
11
11-63