7
4
When you want to make the edge section clear and sharp, or when you
want to make it smooth, press [
5
Press [OK].
–
To release the setting, press [Cancel].
The application screen will be restored.
6
Press [OK].
The scan setting screen will be restored.
7
Press [OK].
The fax screen will be restored.
8
Set other functions if necessary.
–
See "Setting transmission conditions" on page 3-11 for information
about setting functions in the fax screen. See "Application func-
tions overview" on page 7-5 for information about setting functions
in the fax application screen.
9
Designate the destination.
–
See "Selecting one destination" on page 3-21 for designating the
destination.
10
Set the original document.
–
See "Placing originals on the platen glass" on page 3-8 for informa-
tion about setting the document.
11
Press [Start].
The FK-502 reads the document and stores it in memory as a reserved
document before transmission starts.
7-20
Transmission applications
] or [
] to the [+] or [-] side.
C450