Konica Minolta bizhub C450 Fax Manual page 385

Appendix
Terms
O
P
Q
R
C450
Description
Original size set The function to designate the paper size for the document
to be sent. Normally, when the paper size loaded at the
destination is too small to accommodate the image being
transmitted, the original image will be reduced to fit the
paper size. This feature gives you the option printing a
portion of the image with no reduction.
Originating station The facsimile to provide instruction to send document to
multiple stations.
Overseas TX The international communication. In overseas TX, a lower
baud rate will be employed. Select this mode if you send
a fax to the location at which the communication condition
is poor even if it is in your country.
Password TX The function to send fax with a password. Sender has to
send a fax with the same password which is set in closed
network RX if the closed network RX is set at the recipient.
Pause To dial at certain intervals. Pressing the key once creates
an interval of one second.
Polling The function to send a fax that has been read and stored
in the memory in the facsimile when a polling command is
sent from the recipient.
Program The function to register frequently-used fax numbers as
well as templates of operating sequences. Thereafter, you
may select the destination or designate a sequence of op-
erations by pressing the Program key (in the abbreviated
dialing list).
Quick memory In this transmission method, a facsimile is sent the instant
transmission when one page is scanned. This allows documents to be
sent without exceeding memory capacity in the case of
sending a large number of pages.
Reading To scan an original optically and capture it as image data.
Redialing To dial the number of the same destination again. Redial-
ing consists of automatic redialing in which dialing is per-
formed automatically, and manual redialing in which
redialing is performed manually.
Relay TX The function to send a fax to multiple stations via the other
facsimile (called a relaying station). You can save costs by
setting one of the stations as the relaying station and
sending a fax via the relaying station if the terminating sta-
tions are at remote site.
Relaying station The facsimile that sends document to multiple stations by
the relay request from the originating station.
Reserving transmis- The function to reserve the next transmission during com-
sion munication or printing.
Resolution The higher resolution is, the longer it takes to transmit. Se-
lect the appropriate resolution.
Restransmission The function to select documents that have failed to be
sent. The documents are stored in memory, and you can
send again either to the same destination or after chang-
ing to a different destination.
13
13-9