Adjusting The Hole-Punching Positions (Punch Unit Vert. Position) - Konica Minolta bizhub 750 Copy Manual

Utility

Adjusting the Hole-Punching Positions (Punch Unit Vert. Position)

When ZU-602 is installed, the vertical position of the punched holes can be
adjusted.
0 Use the "Punch" function to print a single sample copy, and then perform
the adjustment while checking the sample that was created.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
"Displaying the Administrator Setting Screen" on page 12-39.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [3 Punch Adjustment].
The Punch Adjustment screen appears.
6
Touch [3 Punch Unit Vert. Position].
The Punch Unit Vert. Position screen appears.
bizhub 750/600
12
12-55