Konica Minolta bizhub 750 Copy Manual page 435

12
Parameter
Exit Direction Of 1
Sheet(Platen)
Tri-Fold Printed Side Se-
lection
Print Jobs During Copy
Operation
Note
[Auto Booklet ON When Fold & Staple] is available only if optional finisher
FS-602 is installed.
[Auto Zoom(Platen)], [Auto Zoom(ADF)], [Select Tray when APS OFF],
[Select Tray for Insert Sheet], [Exit Direction Of 1 Sheet(Platen)] and [Tri-
Fold Printed Side Selection] appear only if the "Administrator Security
Level" parameter (displayed from the Administrator Setting screen) is set
to "Level 1" or "Level 2".
[Tri-Fold Printed Side Selection] is available only if optional finisher FS-
602 is installed.
[Print Jobs During Copy Operation] appear only if the "Administrator Se-
curity Level" parameter (displayed from the Administrator Setting screen)
is set to "Level 2".
!
Detail
For details on the "Administrator Security Level" parameter, refer to "Se-
curity Setting" on page 12-37.
12-22
Description
Select the orientation in which copies of
documents placed on the original glass
are fed out.
• Face Down: Copies are fed out print-
ed side down.
• Face Up: Copies are fed out printed
side up.
Select whether the printed side is on the
inside or the outside when the page is
folded in three.
Select whether or not print data can be
accepted for printing while a copy oper-
ation is being performed.
• Accept:
Print data can be accepted and print-
ed.
• Receive Only:
Print data is printed after the copy op-
eration is finished.
• Do Not Accept:
Print data is not received.
Utility
Settings (Default set-
tings are underlined.)
Face Down/ Face Up
Outside/ Inside
Accept/ Receive Only/
Do Not Accept
bizhub 750/600