Konica Minolta bizhub 750 Copy Manual page 87

2
4
Slide the lateral guide to fit the size of paper being loaded.
– Move the lateral
guide while holding
the release button
pressed. When the
button is released,
the guide is locked in
place.
5
Fully push in the paper tray.
Reminder
Do not load so much paper that the top of the stack is higher than the ,
mark.
Reminder
Make sure that the trailing-edge guide is adjusted to fit the size of the
loaded paper.
If there is space between the trailing-edge guide and the paper or if the
trailing-edge guide is not correctly positioned, the paper will not be fed
correctly.
Make sure that the lateral guide is correctly positioned against the edge
of the loaded paper. If the lateral guide is not positioned correctly, the pa-
per size will not be correctly detected or the punched holes will not be
correctly positioned.
If custom-sized paper is loaded, there may be some space between the
paper and the trailing-edge guide. When loading the paper, make sure
that it fits well against the right side of the paper tray, not the trailing-edge
guide.
2-42
Before Making Copies
bizhub 750/600