Adjusting The Finisher; Adjusting The Center Stapling Position - Konica Minolta bizhub 750 Copy Manual

Utility
12.6

Adjusting the Finisher

!
Detail
For details on the "Fold & Staple" setting, refer to "To bind copies at the
center ("Fold & Staple")" on page 3-68.

Adjusting the Center Stapling Position

The stapling position when printing with the "Fold & Staple" function can be
adjusted.
0 Use the "Fold & Staple" function to print a single sample copy, and then
perform the adjustment while checking the sample that was created.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
"Displaying the Administrator Setting Screen" on page 12-39.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [1 Center Staple Position].
The Center Staple Position screen appears.
6
Touch the button for the paper size to be set.
bizhub 750/600
12
12-45